Further Products

Majcoat

Driving rain-proof and diffusion-open breathable membrane for permanently windtight building envelopes

Majpell 5 1.5 m

Vapour control layer for roof renovations from the outside, above-rafter and between-rafter insulation for roof, wall and ceiling structures

The high-performance adhesive compound Primur Roll can easily, quickly and safely be used for various joints inside and outside. For instance plaster, concrete, masonry, wood, metal, gypsum and cement fibreboards, hard plastics etc. are suitable substrates.

Driving rain resistance in combination with the breathable membrane Majcoat has been proven by the TU Berlin.

Your advantages

extremely high adhesive strength without drying time

indoor and outdoor joints can be subjected to loads immediately

apply Primur Roll before mounting the vapour control layer

clean and 50% less working time

constantly 4 mm thick and elastic

reliably absorbs structural movements

Suitable substrates

Wood
Hard wood-based panel materials
Gypsum fibreboards
Plasterboards
Cement fibreboards
Concrete, masonry, plaster
Bituminous sheeting in the base area
Metals
Hard plastics

Suitable membranes

Vapour control layers / diffusion retarder sheeting
Smooth to rough PE/PA/PO/PP sheeting, Kraft papers, Aluminium membranes
Vapour control layers / diffusion retarder sheeting for above-rafter insulation and renovation from the outside
Smooth to rough PE/PA/PO/PP sheeting
Roof underlay membrane
(apart from bitumen and PVC membranes except if given individual approval)
Facade membranes